Two New Steroidal Saponins from the Fresh Leaves of Agave sisalana

A new furostanol saponin, sisalasaponin C ( 1 ), and a new spirostanol saponin, sisalasaponin D ( 2 ), were isolated from the fresh leaves of Agave sisalana, along with three other known steroidal saponins and two stilbenes. Their structures were identified as (3β,5α,6α,22α,25R)‐3,26‐bis[(β‐D ‐glucopyrano‐ syl)oxy]‐22‐hydroxyfurostan‐6‐yl β‐D ‐glucopyranoside ( 1 ), (3β,5α,25R)‐12‐oxospirostan‐3‐yl 6‐deoxy‐α‐L ‐mannopyranosyl‐(1→4)‐β‐D ‐glucopyranosyl‐(1→3)‐[β‐D ‐xylopyranosyl‐(1→3)‐β‐D ‐glucopyranosyl‐(1→2)]‐β‐D ‐glucopyranosyl‐(1→4)‐β‐D ‐galactopyranoside ( 2 ), (3β,5α,6α,22α,25R)‐22‐methoxyfurostane‐3,6,26‐triyl tris‐β‐D ‐glucopyranoside, cantalasaponin‐1, polianthoside D, (E)‐ and (Z)‐2,3,4′,5‐tetrahydroxystilbene 2‐O‐β‐D ‐glucopyranosides. The last three known compounds were isolated from the fresh leaves of Agavaceae for the first time. The structures of the new compounds were elucidated by detailed spectroscopic analysis, including 1D‐ and 2D‐NMR experiments, and chemical techniques.     

Raman spectroscopy measurement of levofloxacin lactate in blood using an optical fiber nano‐probe

Liquid chromatography and mass spectrometry were time‐consuming and expensive as the main methods for the drug analysis at present, and the samples must be pretreated. The Raman spectroscopy measurement methods were fast and simple, so the Raman spectroscopy methods for the drug analysis were explored in this paper. An optical fiber nano‐probe coated with gold nanoparticles was fabricated and used with surface‐enhanced Raman spectroscopy (SERS) to measure levofloxacin lactate. The resulting SERS spectra of levofloxacin lactate in mouse blood that was detected by the optical fiber nano‐probe clearly showed the characteristic wave numbers of levofloxacin lactate, indicating that optical fiber nano‐probes can be used with spectral techniques to analyze drugs in vitro or potentially even in vivo. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of block polyethers with various structures and their application in dispersing single-walled carbon nanotubes

The block polyethers with different structure and composition were synthesized by anionic polymerization and used to disperse single-walled carbon nanotubes (SWNTs). The block polyethers with the structure of branch or benzene ring had better dispersion ability than the commercial Pluronic block polyethers (L64 and F127). In order to compare the parameters, dispersion limit and efficiency of polyethers for SWNTs were defined. UV?Cvis?Cnear infrared absorbance spectra showed that eight-branch polyether AE82 had much larger dispersion limit and efficiency than five-branch AE52. BPE containing benzene rings in the molecule had a slightly lower dispersion limit but larger dispersion efficiency than AE82. The defect density of SWNTs dispersed in polyether aqueous solutions was investigated by Raman spectroscopy. The polyethers AE83 and BEP with the structure of poly(ethylene oxide)?Cpoly(propylene oxide) dispersed less defective SWNTs than AE82 and BPE, indicating that the variation of polyether structure and composition could influence the defect density of SWNTs besides dispersion limit and efficiency.     

Synthesis,Characterization and Photochromic Properties of Novel Naphthopyrans with Hydrazone Unit Residue

A series of naphthopyrans with hydrazone unit ( 8a – 8m ), were synthesized and characterized by ¹H NMR, ¹³C NMR, IR and HRMS. The photochromic properties were investigated under continuous irradiation, in particular regard to the fatigue resistance and the lifetime of the colored open form in solution and polymers. The results showed that these compounds had both good photochromic properties and high fatigue resistance. Detailed studies showed that representative compound 8d (3,3‐di‐4‐methoxybenzoic acid methylenehydrazino‐[3H]‐naphtho [2,1‐b]pyran) had good photochromic properties in THF solution, in solid state, and in polymers, and exhibited a significant bathochromic shift in the spectra of the open forms compared to known naphthopyrans 9 (3,3‐diphenyl‐[3H]‐naphtho[2,1‐b]pyran). On the other hand, the higher melting points of target compounds are promising for the polymer film preparation through hot‐melt method.     

DFT study on the selective oxidation of vinyl chloride on different metal surfaces

Selective epoxidation of vinyl chloride on Ag(111), Pt(111) and Rh(111) with pre-adsorbed atomic oxygen has been studied by density functional theory (DFT) calculation with the periodic slab model. The reaction energies and activation energies of the epoxidation reaction are determined. Because of the asymmetry of vinyl chloride, three competitive reaction pathways are investigated. The results indicate that the most possible reaction pathway is pathway III. Compared the activation energies of the epoxidation reaction on Ag(111), Pt(111) and Rh(111), it is obvious that the reaction via OMMC(3) on Ag(111) is the most possible process. However, the selectivity to the target product over Ag(111) is the lowest among the three metals. The results also indicate that the formation of chloroacetaldehyde is more favorable than that of chloroepoxide.     

Stepwise Assembly of Turn-on Fluorescence Sensors in Multicomponent Metal–Organic Frameworks for in Vitro Cyanide Detection

The controlled synthesis of multicomponent metal–organic frameworks (MOFs) allows for the precise placement of multiple cooperative functional groups within a framework, leading to emergent synergistic effects. Herein, we demonstrate that turn-on fluorescence sensors can be assembled by combining a fluorophore and a recognition moiety within a complex cavity of a multicomponent MOF. An anthracene-based fluorescent linker and a hemicyanine-containing CN⁻-responsive linker were sequentially installed into the lattice of PCN-700. The selective binding of CN⁻ to hemicyanine inhibited the energy transfer between the two moieties, resulting in a fluorescence turn-on effect. Taking advantage of the high tunability of the MOF platform, the ratio between anthracene and the hemicyanine moiety could be fine-tuned in order to maximize the sensitivity of the overall framework. The optimized MOF-sensor had a CN⁻-detection limit of 0.05 μm , which is much lower than traditional CN⁻ fluorescent sensors (about 0.2 μm ).     

ZIF-Induced d-Band Modification in a Bimetallic Nanocatalyst: Achieving Over 44 % Efficiency in the Ambient Nitrogen Reduction Reaction

The electrochemical nitrogen reduction reaction (NRR) offers a sustainable solution towards ammonia production but suffers poor reaction performance owing to preferential catalyst–H formation and the consequential hydrogen evolution reaction (HER). Now, the Pt/Au electrocatalyst d-band structure is electronically modified using zeolitic imidazole framework (ZIF) to achieve a Faradaic efficiency (FE) of >44 % with high ammonia yield rate of >161 μg mg_cat⁻¹ h⁻¹ under ambient conditions. The strategy lowers electrocatalyst d-band position to weaken H adsorption and concurrently creates electron-deficient sites to kinetically drive NRR by promoting catalyst–N₂ interaction. The ZIF coating on the electrocatalyst doubles as a hydrophobic layer to suppress HER, further improving FE by >44-fold compared to without ZIF (ca. 1 %). The Pt/Au-N_ZIF interaction is key to enable strong N₂ adsorption over H atom.     

Energetic Salts Based on an Oxygen‐Containing Cation: 2,4‐Diamino‐1,3,5‐triazine‐6‐one

A family of energetic salts with high thermal stability and low impact sensitivity based on an oxygen‐containing cation, 2,4‐diamino‐1,3,5‐triazine‐6‐one, were synthesized and fully characterized by IR and multinuclear (¹H, ¹³C) NMR spectroscopy, elemental analysis, and differential scanning calorimetry. Insights into their sensitivities towards impact, friction, and electrostatics were gained by submitting the materials to standard tests. The structures of 2,4‐diamino‐1,3,5‐triazine‐6‐one nitrate, 2,4‐diamino‐1,3,5‐triazine‐6‐one sulfate, 2,4‐diamino‐1,3,5‐triazine‐6‐one perchlorate, 2,4‐diamino‐1,3,5‐triazine‐6‐one 5‐nitrotetrazolate were determined by single‐crystal X‐ray diffraction; their densities are 1.691, 1.776, 1.854, and 1.636 g cm^?3, respectively. Most of the salts decompose at temperatures over 180 °C; in particular, the salts 2,4‐diamino‐1,3,5‐triazine‐6‐one nitrate and 2,4‐diamino‐1,3,5‐triazine‐6‐one perchlorate, which decompose at 303.3 and 336.4 °C, respectively, are fairly stable. Furthermore, most of the salts exhibit excellent impact sensitivities (>40 J), friction sensitivities (>360 N), and are insensitive to electrostatics. The measured densities of these energetic salts range from 1.64 to 2.01 g cm^?3. The detonation pressure values calculated for these salts range from 14.6 to 29.2 GPa, and the detonation velocities range from 6536 to 8275 m s^?1; these values make the salts potential candidates for thermally stable and insensitive energetic materials.     

Metabolism of synthetic cannabinoids PB-22 and its 5-fluoro analog, 5F-PB-22, by human hepatocyte incubation and high-resolution mass spectrometry

Background

PB-22 (1-pentyl-8-quinolinyl ester-1H-indole-3-carboxylic acid) and 5F-PB-22 (1-(5-fluoropentyl)-8-quinolinyl ester-1H-indole-3-carboxylic acid) are new synthetic cannabinoids with a quinoline substructure and the first marketed substances with an ester bond linkage. No human metabolism data are currently available, making it difficult to document PB-22 and 5F-PB-22 intake from urine analysis, and complicating assessment of the drugs’ pharmacodynamic and toxicological properties.

Methods

We incubated 10 μmol/l PB-22 and 5F-PB-22 with pooled cryopreserved human hepatocytes up to 3 h and analyzed samples on a TripleTOF 5600+ high-resolution mass spectrometer. Data were acquired via TOF scan, followed by information-dependent acquisition triggered product ion scans with mass defect filtering (MDF). The accurate mass full scan MS and MS/MS metabolite datasets were analyzed with multiple data processing techniques, including MDF, neutral loss and product ion filtering.

Results

The predominant metabolic pathway for PB-22 and 5F-PB-22 was ester hydrolysis yielding a wide variety of (5-fluoro)pentylindole-3-carboxylic acid metabolites. Twenty metabolites for PB-22 and 22 metabolites for 5F-PB-22 were identified, with the majority generated by oxidation with or without glucuronidation. For 5F-PB-22, oxidative defluorination occurred forming PB-22 metabolites. Both compounds underwent epoxide formation followed by internal hydrolysis and also produced a cysteine conjugate.

Conclusion

Human hepatic metabolic profiles were generated for PB-22 and 5F-PB-22. Pentylindole-3-carboxylic acid, hydroxypentyl-PB-22 and PB-22 pentanoic acid for PB-22, and 5′-fluoropentylindole-3-carboxylic acid, PB-22 pentanoic acid and the hydroxy-5F-PB-22 metabolite with oxidation at the quinoline system for 5F-PB-22 are likely the best targets to incorporate into analytical methods for urine to document PB-22 and 5F-PB-22 intake.

Validation of an LC-MS/MS method for the quantitative determination of a novel fungicide: pyraoxystrobin in rat plasma and its application to a toxicokinetics study

A simple, sensitive, and reliable liquid chromatography tandem mass spectrometry (LC-MS/MS) method has been developed for determination of pyraoxystrobin in rat plasma and applied to a toxicokinetics study. The separation was performed by gradient elution on a Luna 5 μ C18 (2) 100 Å column (50?×?4.6 mm I.D., 5 μm) with mobile phase: water (0.1 % formic acid, v/v)/acetonitrile (0.1 % formic acid, v/v), followed by quantification with a mass detector in multiple reaction monitoring (MRM) mode using ESI as an interface. The calibration curve was linear over a concentration range of 1.00–200 ng/mL. The recovery for pyraoxystrobin ranged from 101.4 to 108.2 %. The intraday bias and precision ranged from ?9.3 to 8.1 % and from 0.7 to 8.4 %, respectively, and the interday bias and precision ranged from ?0.3 to 4.0 % and from 4.4 to 7.2 %, respectively. The toxicokinetics of pyraoxystrobin after single 100 and 1,000 mg/kg oral doses were studied in rats. Figure

The chromatogram of pyraoxystrobin highest calibration standard (ULOQ) extract.